Click On Images to See Full Size

Click Anywhere to Close

Vertical Pattern

5100A-HS DME ANTENNA, High Strength

The dBs 5100A-HS is an Omni-directional broadband, 10 element, higher performance, collinear dipole phased array designed specifically for use as a distance measuring equipment (DME) antenna. It includes a high strength radome capable of surviving 180 mph wind loads. It exhibits very low side lobe levels and negative angle radiation (minimizes multipath). The above the horizon null filled pattern minimizes the radiated cone of silence. The antenna handles input power to 5,000 watts at standard DME pulse duty cycle and operates over its entire frequency range with an input VSWR at 50 ohm of less than 2.0:1.

This antenna provides vertically polarized, omni-directional coverage with main beam of radiation uptilted to minimize the effects of ground reflections. The array has two integral monitor probes which constantly sample the RF signal delivered to the antenna.

The array is enclosed and effectively weatherproofed within a high-strength lightweight, small diameter filament wound and ground smooth fiberglass radome for prolonged trouble free use under severe environmental conditions. The radome and base has been ruggedized to withstand greater wind loading. Mounting is made by means of an integral base flange with 6 each mounting bolt holes. All RF input/output ports are type N receptacles.

Obstruction light power is fed through the array and provision is made for mounting an obstruction light and/or arrestor at the top of the array.

Lightning rod kit, obstruction light, pipe adapter (with or without cover) and plate adapter are available option items.

The Model dBs 5100A-HS DME antenna has been designed for ruggedness, lightweight, minimum size, long life and in accordance with FAA-E-2754 and FAA-E-2100. Exceeds the requirements of the UK CAA specification.

Back | Specifications

      © 2017 All Rights Reserved