Click On Images to See Full Size

Click Anywhere to Close

Vertical Pattern

Horizontal Pattern

5100A-HS/210 ADS-B ANTENNA, High Strength

The dBs 5100A-HS/210 is an Uni-directional broadband, 10 element, high performance, collinear dipole phased array designed specifically for use in special coverage needs of automatic dependent surveillance broadcast (ADS-B) system. It includes a high strenght radome capable of surviving 180 mph wind loads. It exhibits very low side lobe levels and negative angle radiation (minimizes multipath). The above the horizon null filled pattern minimizes the radiated cone of silence. The antenna handles input power to 5,000 watts at standard DME pulse duty cycle and operates over its entire frequency range with an input VSWR at 50 ohm of less than 2.5:1.

This antenna exhibits the same vertical pattern as the dBs 5100A, However the horizontal pattern has been modified to produce 6 dB more gain on one side of the pattern as compared to the other side. This type of pattern is very useful in areas where twice the range is needed on one side of the antenna. This horizontal beam shaping is accomplished via integral reflecting elements embedded in the oblong section of the radome.

This antenna provides vertically polarized, Uni-directional coverage with main beam of radiation uptilted to minimize the effects of ground reflections. The array has two integral monitor probes which constantly sample the RF signal delivered to the antenna.

The array is enclosed and effectively weatherproofed within a high-strength lightweight, small diameter filament wound and ground smooth fiberglass radome for prolonged trouble free use under severe environmental conditions. The radome and base has been ruggedized to withstand greater wind loading. Mounting is made by means of an integral base flange with 6 each mounting bolt holes. All RF input/output ports are type N receptacles.

Obstruction light power is fed through the array and provision is made for mounting an obstruction light and/or arrestor at the top of the array.

Lightning rod kit, obstruction light, pipe adapter (with or without cover) and plate adapter are available option items.

The Model dBs 5100A-HS/210 ADS-B antenna has been designed for ruggedness, lightweight, minimum size, long life and in accordance with FAA-E-2754 and FAA-E-2100. Exceeds the requirements of the UK CAA specification.

Back | Specifications

      © 2017 All Rights Reserved